User manual EAW CINEMA Series

If you found this page, you probably have a problem and you need a user manual for the device EAW CINEMA Series. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database EAW CINEMA Series it belongs to the category Speaker System. A user manualEAW CINEMA Series is taken from the manufacturer, a EAW company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device EAW CINEMA Series directly. You can view the user manualEAW CINEMA Series directly online or save and store it on your computer.

Technical Specifications CB153  
CINEMA SERIES  
COMPONENTS & CONSTRUCTION  
DESCRIPTIVE DATA  
LF Subsystem & Loading  
MF Subsystem & Loading  
HF Subsystem & Loading 1x 1-in compression driver on WGP  
Number of Audio Bands 3-way  
1x15-in vented  
1x 8-in vented  
The CB153 is a compact, biamplified (passive mid/high), three-way,  
high-output, full range loudspeaker system intended for use in  
behind-screen cinema applications. The two component system  
consists of a BV154C low frequency enclosure and an HK153 passive  
mid/high system.  
Type of Audio Bands Full Range  
Powering Mode  
System Crossover 350 Hz recommended - EAWCX300-CB153  
Recommended High-Pass  
Frequency (24 dB/Octave) 30 Hz  
Cabinet Type (shape) rectangular (LF), trapezoidal (MF/HF)  
Enclosure Materials 3/4-in MDF, 15mm baltic birch plywood  
baffle (LF); 3/4-in MDF (MF/HF)  
Finish  
Biamplified  
The system requires the use of an external active electronic  
crossover between the LF and mid/high sections with a maximum  
recommended crossover point of 350 Hz. The mid/high component  
includes a internal passive crossover/filter network with the cross-  
over set at 1.8 kHz. EAW's complex, computer-designed passive filter  
networks are tightly aligned to the loudspeakers they control and go  
beyond merely dividing the signal, performing critical equalization  
functions.  
Textured Black  
2x 2 terminal barrier strip  
Connectors  
NOMINAL DATA  
The BV154C low frequency component features a single 15-in low  
frequency driver mounted in an asymmetrical, vented enclosure for  
excellent bass extension and high output level capability with low  
distortion.  
Frequency Response (1 Watt @ 1m)  
±3 dB 40 Hz - 18 kHz  
Axial Sensitivity (dB SPL, 1 Watt @ 1m)  
Passive MF/HF 98  
LF  
98  
The HK153 mid/high component features a 1-in exit compression  
driver loaded with EAW’s proprietary WGP® (Wave Guide Plate) and  
a direct radiating 8-in mid frequency cone transducer.  
Impedance (Ohms)  
Passive MF/HF  
LF  
8
8
Power Handling, AES Standard (Watts)  
Passive MF/HF 320  
The LF cabinet is constructed of 3/4-in Medium Density Fiberboard  
(
1
MDF) with the exception of the baffle, which is constructed of  
5mm void-free, 18-ply-to-the-inch Baltic birch plywood. The mid/  
LF  
500  
Calculated Maximum Output (dB SPL @ 1m)  
Passive MF/HF Peak 129  
LF Peak 131.0  
high enclosure is constructed entirely of the MDF. Extensive internal  
bracing is provided for both the LF and mid/high sections to  
minimize panel resonances resulting from the large acoustical  
energies generated within the enclosure while maximizing acousti-  
cal energy transfer into the audience area. The enclosures and all  
external parts are coated with a textured black finish.  
Passive MF/HF Long term  
123  
LF Long Term 125.0  
Nominal Coverage Angle/-6 dB points (degrees)  
Conical 90  
Recommended Complementary Systems  
Input connectors for both the LF and mid/high sections are 2-  
terminal barrier strips. Separate input connectors for the LF and  
mid/high sections are located on the side of the enclosure for  
convenient access in cramped installation areas.  
Sub  
SB184C, SB185C, SB284C  
Dimensions  
Weights  
Inches  
50.60  
29.50  
36.13  
13.90  
Centimeters  
128.5  
74.9  
91.8  
35.3  
Height  
Width (Front)  
Width (Rear)  
Depth  
The adjustable steel bracket attaching the mid/high component to  
the LF enclosure allows the mid/high section to be aimed indepen-  
dently of the LF section in both the horizontal and vertical planes  
and can be locked once it is positioned. The LF enclosure has 2  
mounting points to allow optimum front/rear positioning of the  
mid/high component.  
Pounds Kilograms  
Net Weight  
Shipping Weight  
105.0  
115.0  
47.8  
52.3  
One Main Street, Whitinsville, MA 01588 • (508) 234-6158 • FAX (508) 234-8251 • Email info@eaw.com • Web http://www.eaw.com  
EAW products are continually improved. All specifications are therefore subject to change without notice. • CB153 PUB#888123 Rev(A)/6/1/99 • Printed In USA  

In addition to the user manual EAW CINEMA Series, we also provide a support panel to help you solve your problems with EAW CINEMA Series. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with EAW CINEMA Series. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with EAW CINEMA Series - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.