If you found this page, you probably have a problem and you need a user manual for the device Ashly ne 8250.70. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Ashly ne 8250.70 it belongs to the category Stereo Amplifier. A user manualAshly ne 8250.70 is taken from the manufacturer, a Ashly company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Ashly ne 8250.70 directly. You can view the user manualAshly ne 8250.70 directly online or save and store it on your computer.

Operating Manual - NE Multi Channel Power Amplifiers  

4

) Pluggable Input DSP Tools - Six boxes are available for custom configuration of pluggable DSP processing  

blocks. Available DSP blocks include Dynamics controls, Gain functions, Graphic and Parametric EQ, Cross  

over functions, Delay, Metering, and a signal generator.  

5

6

) Input/Output Matrix Router - Any input can be routed to any or all outputs. Click and drag from the input to  

output to assign routing. To delete a route, right click on the routing line and delete.  

) Output Mixer - For a given amplifier output channel, all inputs that have been routed in the matrix router are  

mixed together here.  

7

8

9

1

) Pluggable Output DSP Tools - Output DSP tools are the same as those available to the inputs.  

) Output Mute Button - Mutes the output.  

) Output Channel Name - The user can name each output channel.  

0) Output Channel Number - Right click on this to bring up Clear, Copy, Link, and Sub Preset functions for that  

output channel.  

6

. SPECIFICATIONS  

General Power Amplifier Specifications  

Power Output  

Stereo Mode, All Channels Driven  

8

4

ohms, 20Hz-20kHz 1%THD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150W  

ohms, 20Hz-20kHz 1%THD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250W  

Bridge Mode  

8

2

ohms, 20Hz-20kHz 1%THD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500W  

5, 70, 100 Volt models, 20Hz-20kHz 1%THD, per channel . . . . . . . . . . . . . . . . . . . . . . 250W  

Signal to Noise (20Hz-20KHz, unweighted) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >98dB  

Power Requirements (1/8 Power Pink Noise @4 Ohm): . . . . . . . . . . . . . . . . . . . . . . . . . . 360W - 8Ch, 200W - 4Ch  

Distortion (SMPTE, typical) - 8 ohm load, 10dB below rated power: . . . . . . . . . . . . . . . <0.5%  

Distortion (THD-N, typical) - 8 ohm load, 10dB below rated power, 20Hz-20kHz: . . . . <0.5%  

Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Hz-20kHz, +/-1dB  

Damping Factor (8 ohm load, <1kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >250  

Input Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20K Ohm, balanced  

Maximum Input Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +21dB  

Cooling . . . . . . . . . . . . . . temperature dependent speed-controlled axial fan  

Control Network . . . . . . . onboard, compatible with standard 100MB Ethernet hardware  

Front Panel Indicators . . per channel: Clip/Mute, -6dB, -12dB, -18dB, Temp, Current, Bridge (per pair)  

overall: Power, Standby, Protect, Power Switch Disable, Comm  

Control Surface and Amp LEDs: Level meters are dB below RATED output  

Attenuators:  

per channel: front panel, software, offset link group, and remote  

Input Connections . . . . . Euroblock  

Output Connections . . . . Euroblock  

Amplifier Protection  

inrush current limitation, temperature monitoring, output over-current protection, mains fuses  

Power Cable Connector 15A Edison  

Dimensions . . . . . . . . . . . 19”W x 3.5”H x 15.5”D (483 x 89 x 394mm)  

Weight . . . . . . . . . . . . . . . 21 lbs (9.53kg)  

Environmental: . . . . . . . . 40-120 deg. F, (4-49 deg, C) noncondensing  

1

3

• ← Previous
• Next page →

In addition to the user manual Ashly ne 8250.70, we also provide a support panel to help you solve your problems with Ashly ne 8250.70. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Ashly ne 8250.70. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Ashly ne 8250.70 - you will surely help many users by doing so.