If you found this page, you probably have a problem and you need a user manual for the device Extron electronic DA 3AV RCA. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Extron electronic DA 3AV RCA it belongs to the category Stereo Amplifier. A user manualExtron electronic DA 3AV RCA is taken from the manufacturer, a Extron electronic company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Extron electronic DA 3AV RCA directly. You can view the user manualExtron electronic DA 3AV RCA directly online or save and store it on your computer.

Installation and Rear Panel, cont’d  

Through-desk mounting  

c.  

Tighten the screws.  

d.  

Replace the DA inside the surface (repeat step 4).  

Mount the DA AV EQ through a desk or table, using the  

optional through-desk mounting kit (part #70-077-02).  

Rear Panel Features and Cabling  

The following diagrams show the rear panel configurations of  

the 10 models in the DA AV EQ series.  

1

2

1

00-240V  

0.2A  

OUTPUTS  

3

INPUT  

1

2

5

6

HIGH Z  

7

5 Ohm  

5

0/60 Hz  

LOOP-THRU  

4

1

2

4

6

DA 6V EQ rear panel  

1

2

1

00-240V  

0.2A  

INPUT  

OUTPUTS  

3

INPUT  

OUTPUTS  

1

2

5

L

L

1

2

R

R

L

L

3

4

R

R

L

L

5

R

R

HIGH Z  

75 Ohm  

L

R

6

Through-desk mounting the DA AV EQ  

4

6

5

0/60 Hz  

LOOP-THRU  

1

2

3

.

.

.

Mark the opening through which the unit will be  

mounted — approximately 1.8" by 8.9" (4.6 cm by 22.6 cm).  

1

2

4

6

8

10  

Cut out the material from the installation area with a  

jigsaw.  

DA 6AV EQ rear panel  

Drill pilot holes 1/4" (6.4 mm) deep and 3/32" (2 mm) in  

diameter in the desk or table at the locations of the  

mounting bracket screws. The holes should be drilled  

from the underside or inside (concealed side) of the  

furniture where the amplifier will be located.  

1

2

1

00-240V  

0.2A  

OUTPUTS  

3

OUTPUTS  

INPUT  

INPUT  

L

1

2

5

4

5

.

.

Using the four provided wood screws, attach the brackets  

to the mounting surface.  

HIGH Z  

R

7

LOOP-THRU  

5 Ohm  

4

6

1

2

3

4

5

6

5

0/60 Hz  

Slide the unit up and down or back and forth in the  

mounting brackets until the face of the DA is at the desired  

height. Tighten the screws that secure the bracket in place.  

1

2

4

6

9

11  

If the screws are inaccessible to a screwdriver,  

DA 6AV RCA EQ rear panel  

a.  

Mark the location of the brackets relative to the  

screws.  

b.  

Remove the DA from inside the furniture.  

2

-6  

DA AV EQ Series • Installation and Rear Panel  

DA AV EQ Series • Installation and Rear Panel  

2-7  

• ← Previous
• Next page →

In addition to the user manual Extron electronic DA 3AV RCA, we also provide a support panel to help you solve your problems with Extron electronic DA 3AV RCA. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Extron electronic DA 3AV RCA. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Extron electronic DA 3AV RCA - you will surely help many users by doing so.