User manual Extron electronic WM EC F

If you found this page, you probably have a problem and you need a user manual for the device Extron electronic WM EC F. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Extron electronic WM EC F it belongs to the category Stereo Amplifier. A user manualExtron electronic WM EC F is taken from the manufacturer, a Extron electronic company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Extron electronic WM EC F directly. You can view the user manualExtron electronic WM EC F directly online or save and store it on your computer.

Controls and Installation, cont’d  
Cabling  
Connecting audio output  
The P/2 DA2 WM F cabling diagram below shows how to  
Before connecting audio output, determine whether your audio  
system is unbalanced or balanced. Then, follow the instructions  
below to connect unbalanced audio, or the instructions for  
“Balanced audio” to connect balanced audio.  
connect input and output devices to the distribution amplifier’s  
front panel. The P/2 DA2 WM EC F model has identical  
connectors.  
C Wiring the audio incorrectly may damage the audio  
output circuits.  
Unbalanced audio  
To attach the P/2 DA2 WM F/EC F to an unbalanced audio  
system, do the following:  
AUTO POWER  
1.  
Attach the audio cable to an unbalanced speaker input  
connector (tip and sleeve).  
1
00%  
UNITY  
0%  
Tip (+)  
5
GAIN/PEAKING  
Sleeve (  
)
2
.
Attach the audio cable to the audio cable connector (Extron  
part number 10-319-10). Fasten the captive screws inside  
the audio cable connector.  
P/2 DA2 WM F cabling  
1.  
Connect your display device to the 15-pin HD female  
video output VGA connector on the rear of the  
P/2 DA2 WM F/EC F.  
Fasteningcaptivescrews  
CAUTION  
2.  
For audio output, refer to the section “Connecting audio  
output” and connect the audio output cable to the 3.5 mm  
captive screw connector on the rear of the P/2 DA2 WM  
F/EC F.  
For unbalanced audio, connect the  
sleeve(s) to the ground contact.  
DO NOT connect the sleeve(s) to the  
negative (-) contacts.  
Tip  
3.  
4.  
5.  
Connect the power input cable to the rear power input  
connector of the P/2 DA2 WM F/EC F.  
Left  
Right  
NO Ground Here  
Sleeve(s)  
Tip  
NO Ground Here  
Connect the computer’s video cable to the 15-pin HD  
female input cable on the distribution amplifier’s faceplate.  
Unbalanced Output  
If a local monitor is being used, connect the monitor to the  
15-pin HD female buffered local monitor output on the  
faceplate.  
6.  
For audio input, connect the input device into the front  
faceplate’s 3.5 mm female audio jack.  
3.  
Slide the audio cable connector into the audio output  
connector on the interface.  
2
-10  
P/2 DA2 WM/EC/D/AAP Series • Controls and Installation  
P/2 DA2 WM/EC/D/AAP Series • Controls and Installation  
2-11  

In addition to the user manual Extron electronic WM EC F, we also provide a support panel to help you solve your problems with Extron electronic WM EC F. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Extron electronic WM EC F. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Extron electronic WM EC F - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.