User manual Pioneer Elite SC-07

If you found this page, you probably have a problem and you need a user manual for the device Pioneer Elite SC-07. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Pioneer Elite SC-07 it belongs to the category Stereo Receiver. A user manualPioneer Elite SC-07 is taken from the manufacturer, a Pioneer company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Pioneer Elite SC-07 directly. You can view the user manualPioneer Elite SC-07 directly online or save and store it on your computer.

SC07-05.book Page 11 Friday, April 25, 2008 11:59 AM  
Simple Home Theater Guide  
02  
If no operations are performed for 10 seconds while the  
speaker configuration check screen is being displayed,  
the Auto MCACC Setup will resume automatically. In this  
case, you don’t need to select ‘OK’ and press ENTER in  
step 6.  
The settings made in the Auto MCACC Setup should give  
you excellent surround sound from your system, but it is  
also possible to adjust these settings manually using The  
Advanced MCACC menu on page 43 or The System Setup  
menu on page 55.2  
With error messages (such as Too much Ambient  
Noise! or Check microphone) select RETRY after  
checking for ambient noise (see Problems when  
using the Auto MCACC Setup below) and verifying the  
mic connection. If there doesn’t seem to be a  
problem, you can simply select GO NEXT and  
continue.  
Problems when using the Auto MCACC Setup  
If the room environment is not optimal for the Auto  
MCACC Setup (too much background noise, echo off the  
walls, obstacles blocking the speakers from the  
microphone) the final settings may be incorrect. Check  
for household appliances (air conditioner, fridge, fan,  
etc.), that may be affecting the environment and switch  
them off if necessary. If there are any instructions  
showing in the front panel display, please follow them.  
1
a.Full Auto MCACC  
1a.Full Auto MCACC  
A/V RECEIVER  
A/V RECEIVER  
Now Analyzing...  
2/10  
L
C
R
SR  
SBR  
SBL  
SL  
SW  
:
:
:
:
:
:
:
:
YES  
YES  
YES  
YES  
YES  
YES  
YES  
YES  
Environment Check  
Ambient Noise  
Microphone  
:
:
:
OK  
• Some older TVs may interfere with the operation of  
the microphone. If this seems to be happening,  
switch off the TV when doing the Auto MCACC Setup.  
Speaker YES/NO  
1
0
OK  
RETRY  
Exit  
Cancel  
Exit  
Cancel  
The configuration shown on-screen should reflect the  
actual speakers you have.  
Playing a source  
Here are the basic instructions for playing a source (such  
as a DVD disc) with your home theater system.  
If you see an error message (ERR) (or the speaker  
configuration displayed isn’t correct), there may be a  
problem with the speaker connection. If selecting RETRY  
doesn’t work, turn off the power and check the speaker  
connections. If there doesn’t seem to be a problem, you  
can simply use / to select the speaker and / to  
change the setting and continue.  
CATEGORY  
RETURN  
RECEIVER MAIN  
ZONE2  
SOURCE  
HOME  
MENU  
TUNE  
iPod CTRL  
STATUS  
3
PHASE CTRL  
CH LEVEL  
MEMORY  
MULTI  
OPERATION  
TV SOURCE RCV  
THX  
MPX  
DVD  
BD  
DVR1 DVR2  
AUTO/  
STEREO/  
A.L.C.  
DIRECT  
STANDARD ADV SURR  
VIDEO1 VIDEO2 VIDEO3  
HOME MEDIA  
TV  
CH  
VOL  
VOL  
PGM  
BD MENU  
GALLERY  
CD  
CD-R PHONO  
SIGNAL SEL SLEEP DIMMER AUDIO  
6
Make sure ‘OK’ is selected, then press ENTER.  
TVCONTROL  
HDMI TUNER  
XM  
SIRIUS  
INPUT  
MUTE  
MUTE  
A progress report is displayed on-screen while the  
receiver outputs more test tones to determine the  
optimum receiver settings for Channel Level, Speaker  
Distance, Standing Wave, Acoustic Cal EQ and Full Band  
Phase Control.  
SR+  
SBch  
MCACC  
INPUT SELECT  
AUDIO  
VIDEO  
PARAMETER  
PARAMETER  
EXIT  
DISP  
TUNE  
TOOLS  
A.ATT  
GENRE HDMI OUT  
1
Switch on your system components and receiver.  
Start by switching on the playback component (for  
example a DVD player), your TV3 and subwoofer (if you  
Again, try to be as quiet as possible while this is  
happening. It may take 3 to 10 minutes.  
have one), then the receiver (press RECEIVER).  
Make sure the setup mic is disconnected.  
7
to go back to the HOME MENU.1  
The Auto MCACC Setup has finished! Press RETURN  
2
Select the input source you want to play.  
You can use the input source buttons on the remote  
control, INPUT SELECT, or the front panel INPUT  
Be sure to disconnect the microphone from this receiver  
upon completion of the Auto MCACC Setup.  
SELECTOR dial.4  
Note  
1
2
You can also choose to view the settings from the MCACC Data Check screen. See Checking MCACC Data on page 51 for more on this.  
• Depending on the characteristics of your room, sometimes identical speakers with cone sizes of around 12 cm (5 inches) will end up with  
different size settings. You can correct the setting manually using the Manual speaker setup on page 55.  
The subwoofer distance setting may be farther than the actual distance from the listening position. This setting should be accurate (taking  
delay and room characteristics into account) and generally does not need to be changed.  
If Auto MCACC Setup measurement results are incorrect due to the interaction of the speakers and viewing environment, we recommend  
adjusting the settings manually.  
Make sure that the TV’s video input is set to this receiver (for example, if you connected this receiver to the VIDEO 1 jacks on your TV, make  
sure that the VIDEO 1 input is now selected).  
3
4
If you need to manually switch the input signal type press SIGNAL SEL (page 38).  
1
1
En  

In addition to the user manual Pioneer Elite SC-07, we also provide a support panel to help you solve your problems with Pioneer Elite SC-07. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Pioneer Elite SC-07. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Pioneer Elite SC-07 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.