User manual SECO-LARM USA Enforcer RF Receivers SK-910RL-4

If you found this page, you probably have a problem and you need a user manual for the device SECO-LARM USA Enforcer RF Receivers SK-910RL-4. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database SECO-LARM USA Enforcer RF Receivers SK-910RL-4 it belongs to the category Stereo Receiver. A user manualSECO-LARM USA Enforcer RF Receivers SK-910RL-4 is taken from the manufacturer, a SECO-LARM USA company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device SECO-LARM USA Enforcer RF Receivers SK-910RL-4 directly. You can view the user manualSECO-LARM USA Enforcer RF Receivers SK-910RL-4 directly online or save and store it on your computer.

Mode Switch Operation (one per channel)  
Learn mode — Press and hold the switch for three seconds.  
Clear memory — Press three seconds, then when the LED starts flashing, press again for three seconds to  
delete all previously learned codes.  
Reset latched output — If this channel was programmed for latch output, once the relay is turned on with a  
transmitter button, press the mode switch to turn the relay off.  
Memory Display — Press and release the mode switch to show number of codes stored. LED will flash a number  
of times to correspond to the number of codes stored.  
LED Indication (one per channel)  
Steady on — Senses signal from a transmitter button whose code was already learned.  
Fast flash — In the code-learning mode.  
One flash — A transmitter button code was learned.  
Two flashes — All previously learned transmitter button codes were deleted.  

In addition to the user manual SECO-LARM USA Enforcer RF Receivers SK-910RL-4, we also provide a support panel to help you solve your problems with SECO-LARM USA Enforcer RF Receivers SK-910RL-4. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with SECO-LARM USA Enforcer RF Receivers SK-910RL-4. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with SECO-LARM USA Enforcer RF Receivers SK-910RL-4 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.