Installation
Remote input connection
Positioning the unit
It is not necessary to make any connection to this socket in
normal use. This connection is for ease of installation to multi-
room remote control systems and is suitable for modulated
IR commands. Contact your multi-room installer for more
information.
Always place the CD player on a level, firm surface. Placing
your player on a set of dedicated sorbothane isolation feet
will isolate the unit from its surroundings as well as absorbing
the vibrations created within the player itself. You will generally
hear some sonic improvements, which makes this an extremely
cost-effective upgrade.
Connecting to a power supply
Connecting to other equipment
Wrong plug?
Check that the plug supplied with the unit fits your supply and
that your mains supply voltage agrees with the voltage setting
Interconnect cables
Interconnecting cables are not supplied with this CD player. We
recommend high quality cables as inferior quality cables will
degrade the sound quality of your system. Please contact your
Arcam dealer for details of suitable cables.
(120Vor 230V) indicated on the rear panel of the unit.
If your mains supply voltage or mains plug is different, consult
your Arcam dealer or Arcam Customer Support on +44
(0)1223 203203.
Audio outputs
Mains lead
Connect these to your amplifier’s CD or any other line-level
input using suitable high quality interconnect cables. Ensure
that the left and right audio outputs from the CD player are
connected to the same left and right inputs on your amplifier.
The appliance is normally supplied with a moulded mains plug
already fitted to the lead. If for any reason the plug needs to
be removed, it must be disposed of immediately and securely,
as it is a potential shock hazard when inserted into the mains
socket. Should you require a new mains lead, contact your
Arcam dealer.
CD92 only: The second set of sockets can be used to
connect to a second amplifier set up for multi-room use.
Coaxial digital output
Plugging in
Use this socket if you are using a separate digital to analogue
converter (DAC) or digital recorder. Connect to the DAC or
recorder’s digital input using a suitable 75Ω screened cable.
Push the plug (IEC line socket) of the power cable supplied with
the unit into the socket (POWER INLET) in the back of the unit.
Make sure it is pushed in firmly.
CAUTION: Never connect the digital output socket to a
conventional audio input.
Put the plug on the other end of the cable into your power
supply socket and switch the socket on.
Optical digital output
Use this socket if you are using a separate DAC or digital
recorder with an optical connection. Connect using a suitable
optical cable.
CD72 rear panel (part)
CD92 rear panel (part)
2
30V
230V
AUDIO OUTPUTS
L
DIGITAL OUTPUTS
AUDIO OUTPUT
DIGITAL OUTPUTS
CO-AXIAL
REMOTE
IN
REMOTE
IN
R
1
2
POWER INLET
CO-AXIAL
POWER INLET
OPTICAL
OPTICAL
R
L
1
2 3
4 5
1 2 3 4
5
1
2
3
4
5
Power inlet, with voltage indicator
Coaxial digital output
Optical digital output
Single audio output
1
2
3
4
5
Power inlet, with voltage indicator
Coaxial digital output
Optical digital output
Twin audio outputs
Remote input
Remote input
CD72/ 92
4
Have you got problems with your device? Ask a question - our users can help you