User manual Samson UT-5

If you found this page, you probably have a problem and you need a user manual for the device Samson UT-5. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Samson UT-5 it belongs to the category Stereo System. A user manualSamson UT-5 is taken from the manufacturer, a Samson company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Samson UT-5 directly. You can view the user manualSamson UT-5 directly online or save and store it on your computer.

Guide d Tour - UT-5  
6: Group selector - Use the supplied plastic screwdriver to set this to  
the desired Group (this must match the Group setting of the receiver—  
see the Setting Up and Using the UHF Synth Systemsection on page  
16 for more information).  
7: Channel selector - Use the supplied plastic screwdriver to set this to  
the desired Channel (this must match the Channel setting of the receiv-  
ersee the Setting Up and Using the UHF Synth Systemsection on  
page 16 for more information).  
8: Mic level control (trimpot) - If you are using the UT-5 with a lavalier  
or headset microphone, use the supplied plastic screwdriver to set this  
input sensitivity control to the optimum level. See the Setting Up and  
Using the UHF Synth Systemsection on page 16 for more information.  
9
: Input switch - Set this to either the INST position (if you are using  
the UT-5 with an instrument such as an electric guitar or bass) or to the  
MICposition (if you are using it with a lavalier or headset microphone).  
10: Unavailable LED - This LED lights when the selected transmitter  
Group and Channel (as determined by the Group and Channel controls)  
is unavailable (see the reference chart on page 24). If this lights, it is an  
indication that you must choose a different Group and/or Channel for  
both the UT-5 and the receiver. NOTE: It takes approximately two  
seconds for this to light if an unavailable channel is selected.  
11: Instrument level control (trimpot) - If you are using the UT-5 with  
an instrument such as an electric guitar or bass, use the supplied plastic  
screwdriver to set this input sensitivity control to the optimum level.  
See the Setting Up and Using the UHF Synth Systemsection on page  
16 for more information.  
12: Battery holder - Insert a standard 9-volt alkaline battery here, being  
sure to observe the plus and minus polarity markings shown.  
13: Plastic screwdriver - Specially designed for use in setting the  
Group and Channel selectors (see #6 and #7 above) and for adjusting  
the Mic and Instrument level trimpots (see #8 and #11 above). See the  
Setting Up and Using the UHF Synth Systemsection on page 16 for  
more information.  
12  

In addition to the user manual Samson UT-5, we also provide a support panel to help you solve your problems with Samson UT-5. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Samson UT-5. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Samson UT-5 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.