User manual Allied Telesis Switch X900-24XS

If you found this page, you probably have a problem and you need a user manual for the device Allied Telesis Switch X900-24XS. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Allied Telesis Switch X900-24XS it belongs to the category Switch. A user manualAllied Telesis Switch X900-24XS is taken from the manufacturer, a Allied Telesis company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Allied Telesis Switch X900-24XS directly. You can view the user manualAllied Telesis Switch X900-24XS directly online or save and store it on your computer.

x900 Series Switch and SwitchBlade® x908  
. Ensure that the circuit breaker is off for the supply circuit and the Run/  
Standby switch on the PSU. Release the Run/Standby switch so that it is not  
pushed in (which is the Off position).  
. Connect the supply cable wires to the circuit breaker.  
0. Turn on the PSU by pushing in the Run/Standby switch.  
1. Confirm that the switch is receiving power.  
Check that at least one of the PSU LEDs on the front panel of the switch is  
lit green. If no LEDs light, refer to the Hardware Reference for  
troubleshooting information.  

In addition to the user manual Allied Telesis Switch X900-24XS, we also provide a support panel to help you solve your problems with Allied Telesis Switch X900-24XS. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Allied Telesis Switch X900-24XS. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Allied Telesis Switch X900-24XS - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.