User manual Belkin F5D5141uk16

If you found this page, you probably have a problem and you need a user manual for the device Belkin F5D5141uk16. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Belkin F5D5141uk16 it belongs to the category Switch. A user manualBelkin F5D5141uk16 is taken from the manufacturer, a Belkin company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Belkin F5D5141uk16 directly. You can view the user manualBelkin F5D5141uk16 directly online or save and store it on your computer.

Connecting Networking Devices to your Switch  
Connecting your Switch to your Computers  
1
2
.
.
Power down all your equipment.  
Connect a Category 5e or 6 Ethernet cable between each  
computer’s network interface card (NIC) and one of the  
numbered ports on the front of the Switch.  
3
4
.
.
All switch ports can automatically negotiate speeds at full- and  
half-duplex modes to allow users to attach 10Base-T,  
1
00Base-Tx, and 1000Base-T network devices.  
Connect the power cord into the power socket in the rear of the  
Switch; now plug the other end of the power cord into a power  
source (wall jack or power strip).  
4
5

In addition to the user manual Belkin F5D5141uk16, we also provide a support panel to help you solve your problems with Belkin F5D5141uk16. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Belkin F5D5141uk16. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Belkin F5D5141uk16 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.