User manual CH Tech M360

If you found this page, you probably have a problem and you need a user manual for the device CH Tech M360. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database CH Tech M360 it belongs to the category Switch. A user manualCH Tech M360 is taken from the manufacturer, a CH Tech company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device CH Tech M360 directly. You can view the user manualCH Tech M360 directly online or save and store it on your computer.

C&H Technologies, Inc. 445 Round Rock West Drive Round Rock, TX 78681-5012  
(512) 733-2621 FAX (512) 733-2629 www.chtech.com  
M360  
CAN bus  
Controller  
M Module  
The M360 CAN bus Controller is an  
integrated standalone controller for  
the Controller Area Network (CAN)  
with an M Module interface. CAN is  
used within the automotive and  
general industrial environments. The  
M360 contains all necessary  
hardware for high performance  
serial network communications. It  
performs all the functions of the  
physical and data link layers.  
Specifications:  
M Module Compliance  
Transceiver Characteristics:  
Complies with ANSI/VITA Std 12-  
Serial Port Characteristics:  
1996 for single-wide M Modules.  
Data Rates:  
Up to 1 Mbps  
Type:  
PCA82C250T  
Clock Frequency: Programmable  
TTL signals:  
TX0  
TX1  
RX0  
RX1  
Data Transfers  
Interrupts  
16 bit  
INTA  
(on I/O connector)  
Identifier Fields: Standard (11 bit)  
and Extended (29 bit) supported  
IDENT Implemented  
CAN access priority: Determined  
by message identifier  
Controller:  
SJA1000  
Compatible with VXI, VME, PCI,  
PXI, CPCI & Ethernet Carriers  
CANbus support:  
Rev. 2.0a  
Rev. 2.0b  
I/O Buffer Memory:  
TX: 64 bytes (2 CAN messages)  
Front Panel Indicators:  
Applications  
Automotive CAN interfacing  
RX  
10 bytes  
Two LEDs:  
User Programmable  
Status  
Connectors:  
9 pin DSUB  
(Female)  
Industrial Control  
Temperature:  
Full Interrupt Capabilities  
Ordering Information  
Operating:  
Storage:  
0°C to 60°C  
-20°C to 70°C  
Isolation:  
Opto-isolation  
devices ship with M360  
Part Number  
11029690-0001  
Additional Information  
Power:  
+5V @ 0.175 A  
User Manuals for C&H carriers and  
this module can be found on our  
website at www.chtech.com.  

In addition to the user manual CH Tech M360, we also provide a support panel to help you solve your problems with CH Tech M360. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with CH Tech M360. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with CH Tech M360 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.