User manual Cabletron Systems 24

If you found this page, you probably have a problem and you need a user manual for the device Cabletron Systems 24. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Cabletron Systems 24 it belongs to the category Switch. A user manualCabletron Systems 24 is taken from the manufacturer, a Cabletron Systems company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Cabletron Systems 24 directly. You can view the user manualCabletron Systems 24 directly online or save and store it on your computer.

LANVIEW LEDs  
1
.2.1 LANVIEW LEDs  
Cabletron Systems’ LANVIEW Status Monitoring and Diagnostics  
System is a troubleshooting tool. Conveniently located on the front panel,  
LANVIEW LEDs help the user to quickly identify power failures,  
beaconing conditions, cable faults, and link problems.  
Refer to Section 4.1, LANVIEW LED Signals for more information on the  
LANVIEW LED visual status monitoring system.  
1
.2.2 TCU Ports  
Each STH, depending on the STH model (see Table 1-1. ), is equipped  
with 12 or 24 TCU ports, each fitted with a female RJ45 modular  
connector jack to support the attachment of either STP (shielded twisted  
pair) or UTP (unshielded twisted pair) cabling with RJ45 connector plugs.  
Models that support STP cabling use RJ45 connectors that provide a  
grounded connection for the cabling shield.  
Table 1-1. Port and Media List for STH Models  
STH-22  
STH-24  
STH-42  
STH-44  
12 - Unshielded RJ45 ports  
24 - Unshielded RJ45 ports  
12 - Shielded RJ45 ports  
24 - Shielded RJ45 ports  
Lob e Port a nd Multip le Ring Out Port Config ura tions  
Each TCU port on the STH is internally defaulted to operate as a lobe  
interface to support the insertion of a Token Ring station into a ring.  
However, each TCU port may also be reconfigured, via the intelligent  
hub’s Local Management (LM) application, to function as a Ring Out port  
to support the connection of non-intelligent, passive MAU (Multi-Station  
Access Unit) workgroups. See Section 1.2.4, Support for Passive MAU  
Workgroups.  
Ring Sp e e d Fa ult Prote c tion  
STH hubs also provide Ring Speed Fault Protection on each TCU port to  
protect against beaconing conditions caused by stations inserted at the  
Page 1-3  

In addition to the user manual Cabletron Systems 24, we also provide a support panel to help you solve your problems with Cabletron Systems 24. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Cabletron Systems 24. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Cabletron Systems 24 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.