Wenn Sie auf diese Seite gestoßen sind, dann haben Sie bestimmt ein Problem und benötigen eine Anleitung zum Gerät Wilton PF3-EZ. Denken Sie daran zu prüfen, ob es eine Anleitung zu genau diesem Gerät ist, was Sie suchen. In unserer Datenbank gehört Wilton PF3-EZ zu der Kategorie Säge. Die Anleitung Wilton PF3-EZkommt vom Produzenten, der Firma Wilton - es ist ein offizielles Dokument, und wenn Sie irgendwelche Zweifel haben, was den Inhalt betrifft, kontaktieren Sie bitte den Geräteproduzenten Wilton PF3-EZ direkt. Sie können die Anleitung Wilton PF3-EZ direkt online anschauen, oder es auf Ihrem Computer speichern und aufbewahren.

Warning  

1

.

.

Read and understand the entire owners manual before attempting assembly or operation.  

2

Read and understand the warnings posted on the machine and in this manual. Failure to comply with  

all of these warnings may cause serious injury.  

3

.

.

Replace the warning labels if they become obscured or removed.  

4

This stock feeder is designed and intended for use by properly trained and experienced personnel  

only. If you are not familiar with the proper and safe operation of a stock feeder, do not use until  

proper training and knowledge have been obtained.  

5.  

Do not use this stock feeder for other than its intended use. If used for other purposes, WMH Tool  

Group disclaims any real or implied warranty and holds itself harmless from any injury that may result  

from that use.  

6

.

.

Always wear approved safety glasses/face shield while using this stock feeder. Everyday eyeglasses  

only have impact resistant lenses; they are not safety glasses.  

7

Before operating this stock feeder, remove tie, rings, watches and other jewelry, and roll sleeves up  

past the elbows. Remove all loose clothing and confine long hair. Non-slip footwear or anti-skid floor  

strips are recommended. Do not wear gloves.  

8

.

.

Wear ear protectors (plugs or muffs) during extended periods of operation.  

9

Some dust created by power sanding, sawing, grinding, drilling and other construction activities  

contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples  

of these chemicals are:  

•

•

•

Lead from lead based paint.  

Crystalline silica from bricks, cement and other masonry products.  

Arsenic and chromium from chemically treated lumber.  

Your risk of exposure varies, depending on how often you do this type of work. To reduce your  

exposure to these chemicals, work in a well-ventilated area and work with approved safety  

equipment, such as face or dust masks that are specifically designed to filter out microscopic  

particles.  

1

1

1

1

1

0. Do not operate this machine while tired or under the influence of drugs, alcohol or any medication.  

1. Make certain the switch is in the OFF position before connecting the machine to the power supply.  

2. Make certain the machine is properly grounded.  

3. Make all machine adjustments or maintenance with the machine unplugged from the power source.  

4. Remove adjusting keys and wrenches. Form a habit of checking to see that keys and adjusting  

wrenches are removed from the machine before turning it on.  

1

5. Keep safety guards in place at all times when the machine is in use. If removed for maintenance  

purposes, use extreme caution and replace the guards immediately.  

16. Make sure the stock feeder is firmly secured to the table saw before use.  

1

7. Check damaged parts. Before further use of the machine, a guard or other part that is damaged  

should be carefully checked to determine that it will operate properly and perform its intended  

function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting  

and any other conditions that may affect its operation. A guard or other part that is damaged should  

be properly repaired or replaced.  

18. Provide for adequate space surrounding work area and non-glare, overhead lighting.  

19. Keep the floor around the machine clean and free of scrap material, oil and grease.  

20. Keep visitors a safe distance from the work area. Keep children away.  

4

• ← Previous
• Next page →

Außer der Anleitung Wilton PF3-EZ, veröffentlichen wir ebenfalls das Hilfspaneel, das Ihnen bei der Lösung der Probleme mit Wilton PF3-EZ helfen wird. Wenn Sie Fragen haben, können Sie sie im unten angegebenem Formular stellen. Andere Nutzer, die hier reinschauen, werden dann die Möglichkeit haben, Ihnen bei der Lösung des Problems mit Wilton PF3-EZ zu helfen. Denken Sie daran, dass Sie auch die Lösung mit anderen Teilen können. Wenn Sie es selbst geschafft haben, fügen Sie bitte hier die Beschreibung und die Lösung des Problems mit Wilton PF3-EZ hinzu - damit helfen Sie bestimmt vielen Nutzern.