Bedienungsanleitung Klipsch Speaker KW-120-THX

Wenn Sie auf diese Seite gestoßen sind, dann haben Sie bestimmt ein Problem und benötigen eine Anleitung zum Gerät Klipsch Speaker KW-120-THX. Denken Sie daran zu prüfen, ob es eine Anleitung zu genau diesem Gerät ist, was Sie suchen. In unserer Datenbank gehört Klipsch Speaker KW-120-THX zu der Kategorie Lautsprecher. Die Anleitung Klipsch Speaker KW-120-THXkommt vom Produzenten, der Firma Klipsch - es ist ein offizielles Dokument, und wenn Sie irgendwelche Zweifel haben, was den Inhalt betrifft, kontaktieren Sie bitte den Geräteproduzenten Klipsch Speaker KW-120-THX direkt. Sie können die Anleitung Klipsch Speaker KW-120-THX direkt online anschauen, oder es auf Ihrem Computer speichern und aufbewahren.

THX ULTRA2 LOUDSPEAKERS  
Make sure that there is no metal-to-metal contact between the two pins or binding posts.  
Failure to observe this precaution at either end of the connection can result in amplifier  
malfunction or damage.  
Spade lugs. Some speaker cables are terminated with U-shaped connectors called spade  
lugs. Loosen the nuts on a pair of binding posts and slip the spade lugs around the metal  
posts. Screw the nuts down finger-tight on the lugs and inspect to ensure they have  
remained firmly in place. Make sure that there is no metal-to-metal contact between the  
two lugs or binding posts. Failure to observe this precaution at either end of the connection  
can result in amplifier malfunction or damage.  
Other types of specialty connectors are available to facilitate hooking up your speakers.  
Please consult your authorized Klipsch dealer for suggestions and further details.  
SPEAKERS TO AMPLIFIER: KEEPING IT STRAIGHT  
One of the most important things about hooking up your speakers is keeping them in the  
same polarity, or phase. If they are connected out of phase, bass and sound imaging will be  
degraded.  
Figure 5  
The easiest way to ensure that your speakers are wired in phase is to always connect the  
positive and negative output terminals on your amplifier or receiver to the matching input  
terminals on your speakers: positive (“+,” color-coded red) to positive and negative  
BASS MANAGEMENT SETTINGS  
Surround-sound receivers and processors use what is known as bass management to  
ensure that low frequencies in the various channels are sent to speakers that can handle  
them well and away from small speakers that cannot. Klipsch THX Ultra2 loudspeakers are  
optimized for the THX crossover setting. (Technically, that’s an 80Hz crossover with a  
(
“–”, color-coded black) to negative. (See Figure 4.)  
Most pre-made speaker cables have color-coded connectors that make it easy to match  
output and inputs correctly. If yours do not, or if you are making your own out of paired,  
two-conductor wire, look for identifying marks on the insulation of the two conductors.  
Normally there will be printing, a stripe or a molded ridge along one of the conductors.  
1
2
2dB/octave high-pass section feeding the amplifiers for the satellite speakers and a  
4dB/octave low-pass section feeding the subwoofer amplifier.) All THX-certified receivers  
and processors incorporate this crossover in their bass-management systems. Non-THX  
surround-sound components usually have crossovers somewhere from 80 to 100Hz and  
with slopes of 12 to 24dB/octave. Although the THX crossover is ideal for Klipsch THX  
Ultra2 speakers, these other crossovers will usually give acceptable results. Regardless, all  
Klipsch THX Ultra2 LCR and surround loudspeakers should be set to “Small” in your receiver  
or processor’s speaker setup menu.  
Bi-wiring - In bi-wiring, separate cables are connected from the amplifier or receiver output  
terminals to the speaker input terminals for the tweeter and woofers (See Figure 5.) This  
results in lower electrical resistance between the amplifier and speaker than single-wiring  
with the same gauge cable. In some cases bi-wiring may be preferable to single-wiring with  
lower-gauge cable, which will be thicker and probably less flexible.  
CARE AND CLEANING  
The only thing you should ever need to do to your speakers is dust them occasionally. Never  
apply any abrasive or solvent-based cleaner or any harsh detergent. You can clean the grilles  
with the brush attachment of a vacuum cleaner.  
WARRANTY – U.S. AND CANADA  
The Warranty below is valid only for sales to consumers in the United States or Canada.  
KLIPSCH, L.L.C. ("KLIPSCH") warrants this product to be free from defects in materials and  
workmanship (subject to the terms set forth below) for a period of five (5) years from the date of  
purchase. During the Warranty period, KLIPSCH will repair or replace (at KLIPSCH’s option) this  
product or any defective parts (excluding electronics and amplifiers). For products that have  
electronics or amplifiers, the Warranty on those parts is for a period of two (2) years from the  
date of purchase.  
Figure 4  
To bi-wire your THX Ultra2 speakers, loosen the nuts on the binding posts and remove the  
metal straps linking the woofer and tweeter terminals. Observing proper polarity, connect  
one cable to the tweeter binding posts and another to the woofer binding posts. Run both  
cables back to your amplifier or receiver and attach them to the same channel. (Do not, for  
example, attach one to an A speaker output and the other to a B speaker output on an  
amplifier or receiver with A/B speaker switching.) Amplifiers may be severely damaged if  
straps are not removed.  
To obtain Warranty service, please contact the KLIPSCH authorized dealer from which you pur-  
chased this product. If your dealer is not equipped to perform the repair of your KLIPSCH product, it  
can be returned, freight paid, to KLIPSCH for repair. Please call KLIPSCH at 1-800-KLIPSCH for  
instructions. You will need to ship this product in either its original packaging or packaging affording  
an equal degree of protection.  
Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this  
product is within the Warranty period, must be presented or included to obtain Warranty service.  
Biamping – In biamplification, the tweeter and woofers are driven by separate amplifiers fed  
from the same preamplifier output. We do not recommend biamplifying any of our speakers,  
since in general it will produce no benefit that could not be obtained simply by using a  
single larger amplifier and may cause severe sound degradation if not done properly. If you  
This Warranty is invalid if (a) the factory-applied serial number has been altered or removed from  
this product or (b) this product was not purchased from a KLIPSCH authorized dealer.  
You may call 1-800-KLIPSCH to confirm that you have an unaltered serial number and/or you  
purchased from a KLIPSCH authorized dealer.  
do biamplify, use the same model amplifier for the tweeter and woofer sections (to prevent  
frequency-response errors caused by different amplifier gains) and be sure to remove the  
straps linking the two sets of input terminals on the speaker. Amplifiers may be severely  
damaged if straps are not removed.  

Außer der Anleitung Klipsch Speaker KW-120-THX, veröffentlichen wir ebenfalls das Hilfspaneel, das Ihnen bei der Lösung der Probleme mit Klipsch Speaker KW-120-THX helfen wird. Wenn Sie Fragen haben, können Sie sie im unten angegebenem Formular stellen. Andere Nutzer, die hier reinschauen, werden dann die Möglichkeit haben, Ihnen bei der Lösung des Problems mit Klipsch Speaker KW-120-THX zu helfen. Denken Sie daran, dass Sie auch die Lösung mit anderen Teilen können. Wenn Sie es selbst geschafft haben, fügen Sie bitte hier die Beschreibung und die Lösung des Problems mit Klipsch Speaker KW-120-THX hinzu - damit helfen Sie bestimmt vielen Nutzern.

Probleme mit dem Gerät? Stellen Sie Fragen - unsere Nutzer können helfen

Es wurde noch kein Kommentar zu diesem Gerät/ dieser Anleitung hinzugefügt.