3
Unlock the length guide, squeeze the length guide tab inward as
shown, and slide the guide to the correct position for the paper
size being loaded.
Note: Notice the maximum fill line on the side of the tray which
indicates the maximum height for loading paper. Do not
overload the tray.
Dell 5230/5350
2
Quick Reference
Loading paper and
specialty media
3
6
If necessary, adjust the paper guides to lightly touch the sides of
the stack, and lock the length guide for the paper sizes indicated
on the tray.
Loading the 250-sheet or 550-sheet
tray
7
8
Insert the tray.
1
Pull the tray out.
If a different type of paper was loaded than the type previously
loaded in the tray, then change the Paper Type setting for the tray
from the printer control panel.
Note: Do not remove trays while a job prints or while Busy
appears on the display. Doing so may cause a jam.
Notes:
2
Squeeze the width guide tab inward as shown, and move the
width guide to the correct position for the paper size being
loaded.
•
Use the size indicators on the bottom of the tray to help
position the guides.
Clearing jams
•
For standard paper sizes, lock the length guide.
1
4
Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the paper. Straighten the edges on a level
surface.
2
00 and 201 paper jams
1
Push the release latch, and then lower the multipurpose feeder
door.
2
2
5
Load the paper:
1
•
For single-sided printing, load the paper print side facedown
with the leading edge of the papertowardthe front of the tray.
Note: For print jobs using an optional Staple Finisher, place
the leading edge of the paper toward the back of the tray.
•
For two-sided or duplex printing, load the paper faceup with
the leading edge of the paper toward the back of the tray.
Note: For print jobs using an optional Staple Finisher, place
the leading edge of the paper toward the front of the tray.
1
Problème avec le dispositif? Posez une question, nos utilisateurs peuvent aider