0.When cleaning, do not spray water directly onto parts of the product. Doing so may cause ﬁre or
. Do not drop objects on the product or apply strong shock to it. Keep away from a location
subject to excessive vibrationor magnetic interference.
. Do not install in a location subject to high temperature (over 50°C), low temperature (below -
10°C), or high humidity. Doing so may cause ﬁre or electric shock.
. If you want to relocate the already installed product, be sure to turn off the power and then move
or reinstall it.
. Remove the power plug from the outlet when then there is a lightning. Neglecting to do so may
cause ﬁre or damage to the product.
. Keep out of direct sunlight and heat radiation sources. It may cause ﬁre.
. Install it in a place with good ventilation.
. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may
damage the CCD image sensor.
. Apparatus shall not be exposed to dripping or splashing and no objects ﬁlled with liquids, such as
vases, shall be placed on the apparatus.
. The Mains plug is used as a disconnect device and shall stay readily operable at any time.
English – 3