Control Functions - Monitor Open
Blue = No disc
Red = Disc inserted
Press ANGLE to increase the monitor view angle.
Press ANGLE to decrease the monitor view angle.
Do not attempt to move the monitor up/down by hand - severe damage will
occur. Use the front panel buttons or the remote control only.
The color of the LCD monitor varies between viewing angles. Select the angle
with the most optimum view for your location.
The last position of the monitor will be saved in memory. The monitor will
return to its last position automatically the next time it is opened.
Press INFO button for 1 sec to display DVD disc information.
Press and hold INFO for ꢀ secs to change TFT LCD BRIGHTNESS:
Press ANGLE to increase, ANGLE to decrease or use VOLUME rotary to
adjust the level up or down, (0 minimum / ꢀ0 maximum), 10 is default.
If you experience abnormal operation or, your unit is inoperable, press the
RESET button for 3 seconds, located on the front bottom-right corner of the unit.
After a system reset, the unit restores all factory default settings.
Notes: Use the tip of a pen to access the button.