Als u deze pagina heeft gevonden, heeft u waarschijnlijk een probleem en heeft u waarschaijnelijk de danleiding voor het apparaat Milwaukee 6480-20 nodig. Controleer dat het een handleiding is voor het apparaat dat u zoekt. In onze databank Milwaukee 6480-20 behoort het tot de categorie Zaag. De handleiding Milwaukee 6480-20 is afkomstig van de fabrikant, het bedrijf Milwaukee - het is een officieel document, en als u twijfelt over de inhoud, neem dan direct contact op met de fabrikant van het apparaat Milwaukee 6480-20. De handleiding Milwaukee 6480-20 kunt u direct online bekijken of op te slaan op uw computer.
ACCESSORIES
FIVE YEAR TOOL LIMITED WARRANTY
Wheel Kit (49-22-8106)
Every MILWAUKEE electric power tool (including battery charger) is warranted to the original
purchaser only to be free from defects in material and workmanship. Subject to certain excep-
tions, MILWAUKEE will repair or replace any part on a electric power tool which, after examina-
tion, is determined by MILWAUKEE to be defective in material or workmanship for a period of
five (5) years* after the date of purchase. Return the electric power tool and a copy of proof
of purchase to a MILWAUKEE factory Service/Sales Support Branch location or MILWAUKEE
Authorized Service Station, freight prepaid and insured, are requested for this warranty to be
effective. This warranty does not apply to damage that MILWAUKEE determines to be from
repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse,
alterations, abuse, normal wear and tear, lack of maintenance, or accidents.
WARNING
Contains two wheels to allow 8" Saw to
become more portable.
To reduce the risk of injury, always
unplug the tool before attaching or
removing accessories. Use only spe-
cifically recommended accessories.
Others may be hazardous.
Extension Kit (49-22-8108)
For easier cutting and best performance,
MILWAUKEE recommends using the Enx-
tension Kit when: cross-cutting workpieces
that extend beyond the blade by 5' or more
on one side; and when rip-cutting workpieces
longer than 6'.
For a complete listing of accessories refer to
your MILWAUKEE Electric Tool catalog or go
on-line to www.milwaukeetool.com. To obtain
a catalog, contact your local distributor or a
service center.
*
The warranty period for Hoists (lever, hand chain, & electric chain hoists), Ni-Cd battery
Mid-Way Fence Kit (49-22-8110)
packs, Work Lights (cordless flashlights), Job Site Radios, and Trade Titans™ Industrial Work
Carts is one (1) year from the date of purchase.
Allows you to cut small panels waist high on
the 8" Saw frame. Kit includes both right and
left-hand sides, 30" rulers, a manual stop
block, and quick-change wood fences.
*There is a separate warranty for Li-Ion Battery Packs that accompany the power tools:
Hold Down Bar Kit (49-22-8100)
*Every MILWAUKEE Li-Ion Battery Pack is covered by an initial 1000 Charges/2 Years free
replacement warranty. This means that for the earlier of the first 1000 charges or two (2) years
from the date of purchase/first charge, a replacement battery will be provided to the customer
for any defective battery free of charge. Thereafter, customers will also receive an additional
warranty on a pro rata basis up to the earlier of the first 2000 charges or five (5) Years from
the date of purchase/first charge. This means that every customer gets an additional 1000
charges or three (3) years of pro rata warranty on the Li-Ion Battery Pack depending upon
the amount of use. During this additional warranty period, the customer pays for only the
useable service received over and above the first 1000 Charges/2 years, based on the date
of first charge and number of charges found on the battery pack via MILWAUKEE’s Service
Reader. After 1000 charges/2 years from the date of purchase/first charge, the customer will
be charged a prorated amount for the service rendered.
Holds thin, flexible material in place, provid-
ing chatter-free cutting. Spring arms have
built-in nylon rollers to prevent material
from being marred. Will accept material up
to 3/4" thick.
Saw Blades
For best performance and the most accurate
cut, MILWAUKEE recommends using the
following blades in the chart.
Quick-Stop Gauging Kit (49-22-8102)
No. of
Kerf
Cat. No.
8-40-4148 Framing/Ripping 18
Description Teeth Thickness Diameter
Allows you to quickly and accurately position
a sliding aluminum stop block to cut different
lengths of material.
4
4
4
.071"
.071"
.071"
.122"
.122"
.122"
8-1/4"
8-1/4"
8-1/4"
8-1/4"
8-1/4"
8-1/4"
8-40-4150
Rip/Crosscut
Trim/Finish
Rip/Crosscut
Trim/Finish
Trim/Finish
24
40
24
40
60
8-40-4152
Dust Collecting Kit (49-22-8105)
48-40-4154
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE
product. However, proof of purchase in the form of a sales receipt or other information deemed
sufficient by MILWAUKEE, is requested.
4
8-40-4156
8-40-4158
Self-contained kit collects dust and debris.
Requires a vacuum. MILWAUKEE recom-
mends using vaccum model numbers: 8911,
4
8
supplied with the kit has an inner diameter
of 1-1/2".
912, 8925 and 8935. The attachment host
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DE-
SCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF
EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU
SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LI-
ABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES,
OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED
TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY
PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CON-
DITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE
GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMSANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL
OTHER WARRANTIES.
Dust Collecting Kit
Hold Down Bar Kit
Mid-way
Fence Kit
This warranty applies to product sold in the U.S.A., Canada and Mexico only.
Please consult MILWAUKEE’s website www.milwaukeetool.com or call 1.800.SAWDUST
(
on a MILWAUKEE electric power tool.
1.800.729.3878) to locate your nearest service facility for warranty and non-warranty service
Quick Stop Gauging Kit
Extension Kit
Wheel Kit
18
19
Naast de handleiding Milwaukee 6480-20, bieden wij ook hulp panel die u zal helpen om uw problemen op te lossen met Milwaukee 6480-20. Als u vragen heeft, kunt u ze in het onderstaande formulier invullen. Andere gebruikers zullen ze zien en kunnen u helpen om uw probleem op te lossen met Milwaukee 6480-20. Vergeet niet dat u ook de oplossing kunt delen. Als u uzelf het probleem heeft opgelost, plaats hier een beschrijving en uw oplossing met Milwaukee 6480-20 - u zal zeker de vele gebruikers helpen
Problemen met het apparaat? Stel een vraag - onze gebruikers kunnen helpen