User manual for QSC Audio I-YM8 - a user manual, servicing manual, settings and specifications ofQSC Audio I-YM8 - page 10 - User manuals and advice for your devices

User manual QSC Audio I-YM8

If you found this page, you probably have a problem and you need a user manual for the device QSC Audio I-YM8. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database QSC Audio I-YM8 it belongs to the category Speaker. A user manualQSC Audio I-YM8 is taken from the manufacturer, a QSC Audio company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device QSC Audio I-YM8 directly. You can view the user manualQSC Audio I-YM8 directly online or save and store it on your computer.

Painting the I-82H Loudspeaker

The loudspeaker enclosure, grill, and mount can be painted to match any decor, provided the following precautions are observed.

The cabinet is made of high impact polystyrene which requires controlled painting procedures in order to obtain good results. Use a

paint “system” designed for high impact polystyrene from any reputable paint supplier.

- Remove the grill.

- If painting mount and loudspeaker as a unit: Attach the I-YM8.

- Mask the loudspeaker’s input connector.

- Mask the woofer, tweeter, and port being certain not to apply tape directly to the drivers. Alternatively, the inside of the grill can

be completely masked and set in place on the loudspeaker enclosure for painting.

- Wash the components to be painted with a mild soap and hot water. Be careful not to get water on or into either of the drivers or

the input connections. Rinse with hot water. Allow to dry thoroughly.

- Scuff-sand the components to be painted using red Scotchbrite® pad or 320 - 400 grit sandpaper.

- Using compressed air, remove all dust from the components to be painted. Do not blow compressed air directly into either driver.

- Clean the components to be painted.

- Using a clean, lint-free, white cloth, wipe the components to be painted with suitable prep solution.

0- Apply adhesion promoter.

1- Apply primer topcoat.

2- Apply paint.

3- Allow to dry for at least 8 hours before handling.

View all pages of the user manual

1 2 3 4 5 6 7 8 9 10 11

In addition to the user manual QSC Audio I-YM8, we also provide a support panel to help you solve your problems with QSC Audio I-YM8. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with QSC Audio I-YM8. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with QSC Audio I-YM8 - you will surely help many users by doing so.

Language

User manual QSC Audio I-YM8

Have you got problems with your device? Ask a question - our users can help you