User manual Krell Industries 350Mcx

If you found this page, you probably have a problem and you need a user manual for the device Krell Industries 350Mcx. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Krell Industries 350Mcx it belongs to the category Stereo Amplifier. A user manualKrell Industries 350Mcx is taken from the manufacturer, a Krell Industries company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Krell Industries 350Mcx directly. You can view the user manualKrell Industries 350Mcx directly online or save and store it on your computer.

Front Panel Description  
The front panel accesses power on/stand-by  
and infrared sensor (remote control) functions.  
The power stand-by, bias, regulator, and Krell  
CAST LEDs, arranged in a triangle on the front  
Note  
An optional remote control is available for Full  
Power Balanced amplifiers.  
panel above the power button, illuminate to indi- FULL POWER BALANCED  
cate amplifier status.  
750Mcx, 450Mcx, AND 350Mcx  
MONAURAL POWER AMPLIFIERS  
FULL POWER BALANCED  
See Figure 2 on page 7  
7
00cx, 400cx, AND 300cx  
STEREO POWER AMPLIFIERS  
7
Power Stand-by LED  
See Figure 1 on page 6  
The blue power stand-by LED (top of LED tri-  
angle) illuminates when the back panel power  
breaker switch has been moved to on, engag-  
ing the input circuitry and placing the amplifier  
in stand-by mode.  
1
Power Stand-by LED  
The blue power stand-by LED (top of LED tri-  
angle) illuminates when the back panel power  
breaker switch has been moved to on, engag-  
ing the input circuitry and placing the amplifier  
in stand-by mode.  
8
Bias LED  
The blue bias LED (lower left of triangle) illumi-  
nates after the front panel power button is  
pressed, indicating that the Sustained Plateau  
Bias III is engaged.  
2
Bias LED  
The blue bias LED (lower left of triangle) illumi-  
nates after the front panel power button is  
pressed, indicating that the Sustained Plateau  
Bias III is engaged.  
9
Power Button  
Use the silver power button to power on the  
amplifier from stand-by mode.  
3
Power Button  
1
The infrared sensor receives the signal from a  
remote control.  
0 Infrared Sensor  
Use the silver power button to power on the  
amplifier from stand-by mode.  
4
Infrared Sensor  
1
1 Krell CAST LED  
The infrared sensor receives the signal from a  
remote control.  
The red Krell CAST LED (center of triangle) illu-  
minates when a Krell CAST input on the back  
panel is connected to another Krell product with  
a Krell CAST output.  
5
Krell CAST LED  
The red Krell CAST LED (center of triangle) illu-  
minates when a Krell CAST input on the back  
panel is connected to another Krell product with  
a Krell CAST output.  
12 Regulator LED  
The blue regulator LED (lower right of triangle)  
illuminates after the front panel power button is  
used to power on from stand-by mode, indicat-  
ing that the regulator is providing power to the  
output stage.  
6
Regulator LED  
The blue regulator LED (lower right of triangle)  
illuminates after the front panel power button is  
used to power on from stand-by mode, indicat-  
ing that the regulator is providing power to the  
output stage.  
8
Krell Full Power Balanced X Series Power Amplifiers  

In addition to the user manual Krell Industries 350Mcx, we also provide a support panel to help you solve your problems with Krell Industries 350Mcx. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Krell Industries 350Mcx. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Krell Industries 350Mcx - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.