このページへお越しの方は、おそらくデバイスQSC Audio I-YM8に関する問題を抱えており、その説明書を必要としていることでしょう。お探しの説明書がお持ちのデバイスのそれであることを必ずご確認ください、お探しのQSC Audio I-YM8は、このデータベースではカテゴリースピーカーに属します。 説明書QSC Audio I-YM8はメーカーQSC Audioの発行するものです　－　これは公式文書であるため、その内容に疑問がある場合はデバイスQSC Audio I-YM8の製造元に直接お問い合わせください。説明書QSC Audio I-YM8はオンラインで直接見たりコンピュータにダウンロードし保存したりすることができます。

I-82H Introduction  

Thank you and congratulations on your purchase of the ISIS Series  

I-82H High Performance Portable Loudspeakers. This product rep-  

resents the state-of-the-art in lightweight sound reinforcement  

loudspeaker systems. To get the most from your investment, we  

encourage you to review this manual carefully.  

The I-82H loudspeaker system is a full range, high output, two-  

way design delivering superior sound quality and high SPL in a  

lightweight, attractive enclosure. Equipped with two Speakon®  

connectors, connection is fast and reliable with parallel connec-  

tion of multiple cabinets literally a snap. These loudspeakers  

make an excellent choice for a wide variety of applications.  

Two mounting adapters are provided; a pole cup that accepts  

EN  

1

.375” or 1.500” (35 mm or 38 mm) pole diameters and a 5/8”-27  

mic stand adapter (fits most mic and boom stand hardware). The  

pole cup is equipped with a retaining knob to secure the adapter  

to the pole. Also included are four self-adhesive rubber feet for  

the bottom of the enclosure.  

I-YM8 Optional Yoke Mount / Floor Monitor Kit  

The optional I-YM8 Accessory Kit provides a yoke mount suitable  

for pole mounting and a pair of swivel extension feet for use as  

floor or stage monitors. The included pole cup or mic stand  

adapter can be attached to the yoke mount using the included  

knob as well as standard truss clamps for additional mounting  

options.  

Coverage Angles  

Before mounting the loudspeaker, determine the mounting orien-  

tation and desired coverage angles. As supplied from the factory,  

the loudspeaker’s coverage angles are 90° (horizontal) x 60° (ver-  

tical) with the cabinet oriented vertically. The waveguide can be  

rotated to interchange the coverage angles.  

Rotating the Waveguide to Alter HF Coverage Pattern  

1

- Remove the grill. Gently and evenly work the grill out of its  

retaining groove to avoid bending the grill.  

2

- Remove the eight waveguide retaining screws. A #2-size Phil-  

lips screwdriver is recommended.  

3

- Reach into the waveguide’s port and pull gently to remove the  

waveguide. Be careful not to damage the connections, wiring, or  

the gasket between the waveguide and the cabinet.  

4

- Rotate the horn 90° clockwise or counter clockwise and set it  

back in place. Make certain the wiring is not stressed or pulled  

loose from its connections.  

5

- Before reinstalling the waveguide screws, lift the assembly a  

small distance and make sure that the gasket is properly in place.  

Reposition it, if required. Set the waveguide in place and reinstall  

the screws. Do not overtighten.  

6

- Replace the grill.  

Logo Badge Rotation  

The logo badge on the grill screen can be removed, rotated, and  

reinstalled. Using your fingers, pull the logo badge straight out.  

Rotate to the desired position and push back into place.  

3

• ← Previous
• Next page →

QSC Audio I-YM8の説明書の他にも、あなたがQSC Audio I-YM8とその問題を解決するのに役立つヘルプパネルを提供しています。何か質問がある場合は、以下のフォームから送信することができます。他のユーザーがここを訪問し、あなたのQSC Audio I-YM8に関する問題解決を支援してくれるかもしれません。また、あなたがたどり着いた解決方法についてもご共有することをお忘れなく。うまく解決できた場合はQSC Audio I-YM8に関する問題とその解決法についてこちらにご記入ください　－　きっと数多くのユーザーに役立つことでしょう。